| Cat
No. |
Description |
|
944 |
Study of Frequency/FSK Modulation &
Demodulation
Objective : Measurement of Frequency Modulation Index (Depth of
modulation),
side band frequencies (upper side band & lower side band) and frequency
of demodulated signal.
Features : Instrument comprises of DC Regulated Power Supply 12
VDC/150 mA, Square wave Oscillator with 100 Hz- 1 KHz Frequency Output,
Circuit diagram printed & Components mounted on the panel. Connections
of Supplies & Components brought out at 4 mm Sockets.
Optional Acc. : CRO 10 MHz. |
| |
|
945 |
Study of Frequency Modulation
Objective : Measurement of
Frequency Modulation Index (Depth of modulation)
Features : Instrument comprises of DC Regulated Power Supply 12
VDC/150 mA, Sine wave Oscillator with 100Hz- 1 KHz Frequency Ouptut,
Circuit diagram printed & Components mounted on the panel. Connections
of Supplies & Components brought out at 4 mm Sockets.
Optional Acc. : CRO 10 MHz. |
|
|
|
946 |
Study of Pulse Amplitude Modulation &
Demodulation
Objective : Measurement of Pulse
Amplitude Modulation Index (Depth of modulation) and Frequency of
demodulated signal.
Features : Instrument comprises of DC Regulated Power Supply 12
VDC/150mA, AF Sine wave Oscillator with 100 Hz - 10 KHz Frequency
Output,Carrier Wave Oscillator using IC 555,Circuit diagram printed &
Components mounted behind the panel. Connections of Supplies &
Components brought out at 4 mm Sockets.
Optional Acc.: CRO 10 MHz. |
| |
|
947 |
Study of Pulse Amplitude Modulation |
| |
|
948 |
Study of Pulse Amplitude Demodulation |
| |
|
949 |
Study of Pulse Width Modulation &
Demodulation
Objective : Modulation of Carrier Signal in Pulse Position Pulse
Width Mode
using External AF Signal and Frequency of Demodulated Signal.
Features : Instrument comprises of DC Regulated Power Supply 5
VDC/ 150mA,Carrier Wave Oscillator using IC 555,Circuit diagram printed
Components mounted behind the panel. Connections of Supplies Components
brought out at 4 mm Sockets.
Optional Acc.: Audio Frequency Function Generator and CRO 10 MHZ. |
| |
|
950 |
Study of Pulse Position Modulation &
Demodulation
Objective : Modulation of Carrier Signal in Pulse Position Mode and
Frequency of Demodulated Signal.
Features : Instrument comprises of DC Regulated Power Supply 5
VDC/150 mA,AF Sine wave Oscillator with 100 Hz-10 KHz Frequency
Output,RF Oscillator using IC 555,Circuit diagram printed & Components
mounted behind the panel. Connections of Supplies & Components brought
out at 4 mm Sockets.
Optional Acc.: CRO 10 MHz. |
|
|
|
951 |
Study of Pulse Position & Pulse Width
Modulation
Objective : Modulation of Carrier Signal in Pulse Position &
Pulse Width Mode using External AF Signal and Frequency of Demodulated
Signal.
Features : Instrument comprises of DC Regulated Power Supply 5
VDC/150 mA, Carrier Wave Oscillator using IC 555,Circuit diagram printed
& Components mounted behind the panel. Connections of Supplies &
Components brought out at 4mm Sockets.
Optional Acc.: Audio Frequency Function Generator and CRO 10 MHz. |
|
|
|
952 |
Study of Phase Locked Loop PLL Circuit
Using K 565
Objective : To study the phase locked loop circuit and calculated
the lock range Frequency and capture range Frequency.
Frequency : Instrument comprises of Two DC Regulated Power
Supplies, IC 565,combination of resistance, Capacitors One Potentiometer
connected inside connections brought out at front panel.
Optional Acc.: Audio Frequency Function Generator and CRO 10 MHZ. |
|
ACTIVE & PASSIVE FILTER CIRCUITS |
|
960 |
Study of "T" type Passive Low Pass,
High Pass, Band Pass & Band Stop Filter |
|
|
|
961 |
Study of "T" type Passive Low Pass
Filter |
|
|
|
962 |
Study of "T" type Passive Band Pass
Filter |
|
|