| Cat 
        No. | Description | 
      
        |  | De-sauty’s Bridge 
 For comparing capacitance in terms of resistance. Three decade dials of 
        10, 100 & 1000 ohms are there in one arm. And another set of 3 decade 
        resistance dials in the 2nd arm. Fitted with special morse key. Manganin 
        coils. Accuracy 0.1 %.
 | 
      
        |  | 
      
        |  | Schering Bridge 
 For measurement low capacitances. The bridge comprises 3 decade dials of 
        standard capacitors of .001, .01 & 1 mfd. Two Resistive Ratio dials. A 
        variable condenser 0-1000 pF and three resistive decade dials of 1, 10 & 
        100 ohms Manganin Coils Accuracy 0 .1 %
 | 
      
        | 
        OVERHEAD PROJECTORS | 
      
        | 341 | Overhead Projectors : A most compact light weight body projector having 24V/250 watt 
        Halogen lamp for condenser size 25x25cms. Thermostatically controlled 
        heavy duty cooloing blower. Finest Quality projection lenses and 
        reflecting Mirror for horizontal projection which works through roller 
        sliding system, complete with 8 meters of cellophane Roll and 4 Numbers 
        Overhead Transpareencies in thick card frame (Blank) with 6 numbers 
        Grease pencils, instrument workable on 220/230 volts Ac. Duly packed in 
        thick card board box.
 | 
      
        |  | 
      
        | 342 | With 24V/250Watts halogen Lamp & computer 
        fan For efficient cooling (Deluxe Model) | 
      
        |  | 
      
        | 343 | Same as 342 but with remote control switch 
        On/OFF of OHP. | 
      
        |  | 
      
        | 344 | Same as above 341 Model but  with 
        dual lamp arrangement ,very convenient to change the bulb (by just 
        slider knob) if the bulb in operation is fused.  Remote control 
        switch is also provided | 
      
        |  | 
      
        | 345 | Screen for projector : It is 
        special type screen fitted on metallic stand easily collapsible, it 
        takes few seconds to assemble. The screen is having box with spring 
        action for rolling the screen autmatically packing up in metal box. Size of Screen :- (i) 50" x 70"
 (i) 50" x 50"
 | 
      
        | 
        MODULATED CIRCUITS | 
      
        | 346 | Amplitude Modulation & Demodulation 1. To construct amplitude Modulator using transistor and to 
        demonstrate how much intelligence can be added, to a carrier and observe 
        the amplitude modulated waveforms and check the % of modulation.
 2. To demonstrate how intelligence can be recovered from an amplitude 
        modulated carrier by using diode demodulator. It has got three parts 
        namely RF oscillator, AM modulator and AM demodulator. Provided with 
        built in regulated power supply @ + 15V/500mA.
 | 
      
        |  | 
      
        | 347 | Frequency Modulation & Demodulation To demonstrate how the modulating signal changes frequency of the 
        carrier rather than amplitude and observe the frequency modulated 
        waveform on CRO. To study the changes in carrier centre frequency & to 
        study the frequency deviation. To study how the phase lock loop can be 
        used for demodulation and the audio signal is demodulated. Provided with 
        built in regulated power supply @ + 5V/250mA ; 5V/250mA +15V/500mA.
 | 
      
        |  | 
      
        | 348 | Phase Modulation 1. To demonstrate how a carrier's instantaneous phase angle is made 
        to vary in proportion to the modulating signal's amplitude.
 2. To demonstrate the effect of frequency deviation when the modulating 
        signal crosses zero axis.
 3. To demonstrate how phase change occurs when the modulating wave 
        changes polarity from + to - and from - to +. To demonstrate why phase 
        modulation is some times called as indirect F.M. Provided with built in 
        regulated power supply @ +15V/500mA.
 | 
      
        |  |